01 / T-Shirts
220–300GSM boxy and oversized tees.
Nine weights: 220, 230, 240, 250, 260, 270, 275, 280, 300GSM. Screen print, 3D puff, DTG, rhinestone, raw-edge finishing.
US$4.50–18.00 · 1–50 pcs per style
View T-Shirts
One-stop streetwear development · Hunan, China · Audited on site
Development, fabric, fit, wash, trims, labelling and export documents — one team, one point of accountability. 220–500GSM cotton, sampling from one piece.
Sample requests get a written reply: price, spec and a sampling date. No account required.
450GSM washed fleece, drop shoulder, US$24.81–38.57.
What is verifiable
We do not lead with adjectives. These are the four figures a buyer checks first, and each one is stated again on the page where it applies.
From 220GSM blanks to 450–500GSM washed fleece, printed on the card so a second batch can be checked against the first.
Approve hand-feel, fit and wash on a physical piece. The sample minimum is not a negotiation tactic, it is the number we work at.
A first run that fits your sell-through plan, with a repeat path once a style proves out.
Intertek recorded four scopes on this date: incoming material inspection, on-site technical support, sample-based customization, finished product inspection.
Seven lines
Four apparel lines are documented to the weight, wash and price. Three extensions — headwear, footwear, accessories — are developed to the same specification and quoted per order. Every card states which is which.
01 / T-Shirts
Nine weights: 220, 230, 240, 250, 260, 270, 275, 280, 300GSM. Screen print, 3D puff, DTG, rhinestone, raw-edge finishing.
US$4.50–18.00 · 1–50 pcs per style
View T-Shirts
02 / Hoodies
Acid wash, snow wash, vintage wash, destroy and raw edge, two-layer hood, drop shoulder.
US$5.80–38.57 · 1–50 pcs per style
View Hoodies & SweatshirtsSpecifications from the 2026 outdoor catalog. Price and bulk quantity quoted per order.
6–12 colours · XS–4XL
Three 2026 softshell programs, 320–330GSM, plus development against your tech pack. Weight, fibre and size run stated; price quoted per order.
Price on request · XS–4XL
View OuterwearTwo technical trouser programs. Price and bulk quantity quoted per order.
4–5 colours · M–5XL
Two 255GSM technical programs from the catalog, plus development to your cut. Built for brands selling the full outfit, not a single top.
Price on request · M–5XL
View BottomsEntry styles
The lowest minimum in each apparel line, priced on the card. Two pieces is enough to judge the block, the weight and the finish before a run is committed — and the same file carries straight into bulk.
One-stop, defined
“One-stop” is worth nothing unless you can name the stops. These are ours — and each one says where your side begins, because that boundary is where most programs slip.
Have a tech pack? We cost it. Have only a reference and a target price? We develop the silhouette, measurements and artwork placement with you, then turn it into a construction note, a graded size chart and a bill of materials. Artwork and technical drawing come back within 3 hours of a clear brief; the first sample within 24 hours of approval.
Your side: brand direction and target price. Revision rounds are agreed in writing before we start.
220–500GSM cotton and blends, matched by hand against your reference — not only against a number on a sheet.
Your side: approval on a physical swatch.
Drop-shoulder boxy, oversized or regular, with shoulder, chest, body length and armhole set as separate parameters rather than scaled from a regular fit.
Your side: your graded chart, or sign-off on ours.
Nine finishes — acid, snow and vintage wash, destroyed and raw edge, 3D puff, screen print, embroidery, rhinestone, DTG — approved on a physical reference that becomes the bulk standard.
Your side: placement drawings and colour references.
Drawcords, zips, rib tension, main label, care label, hangtag copy, polybag and carton mark — built to your spec, not from a stock set.
Your side: label artwork and packing instructions.
Intertek on-site audit of 06 July 2026, EU GPSR representative, German packaging registration DE4832998409726, plus composition and inspection records.
Your side: destination market, and the product data your market requires from 2027.
20–50 pieces per style, four inspection stages, and export documents quoted against the incoterm you name.
Your side: shipping instructions and consignee details.
Hats, shoes and accessories developed to the same wash, thread and label references, so a drop ships as one collection rather than three separate purchases.
Your side: the reference pieces you want matched.
The finish
Weight is a purchasing decision. Wash and decoration are where a batch fails. This is the part of the work we put under a fixed reference before bulk.
Wash
Print & construction
Five steps
One named contact, one written date at each step. Nothing moves until the previous step is signed off.
A tech pack, a graded size chart, a reference sample, or five lines of text. Any of the four is enough to start.
Fabric, weight in GSM, wash, decoration, size run, unit price and quantity breaks — confirmed in writing, not on a call.
You approve hand-feel, fit and colour on a physical piece. The approved sample becomes the standard for bulk.
Production against the approved spec.
Checked against the approved sample and spec sheet. Inspection level and payment terms are stated on the quote.
Third-party
Intertek conducted an on-site audit of this supplier on 06 July 2026. Four scopes were recorded. Each one answers a question buyers ask before a first order.

What we can send
What we cannot send
Certificates we do not hold. No certification mark appears on this site unless it can be produced on request. If a document matters to your compliance team, ask — you will get a yes or a no, not a logo.
If something goes wrong
A guarantee is worth exactly what happens after something goes wrong. This is the part most supplier sites leave out, so here it is in writing.
Finished goods that do not match the approved sample are held and corrected before they leave. You are not asked to accept a compromise batch because it is already made.
If a defect traces back to production — weight under spec, wash off the approved reference, decoration lifting — we rework or replace at our cost. The conversation starts from the batch reference and photographs, not from a price negotiation.
A claim inside the window stated on the proforma invoice, with the batch reference and photographs. That is what lets us trace it to a production run instead of guessing.
This applies to apparel, headwear and footwear. Accessories follow the same rule at their own minimums. The claim window and the inspection level are both printed on the proforma invoice, so neither side has to remember them.
Current programs
Six styles quoted this quarter. Each one links to its line.
Who this fits
AStreetwear labels and DTC brands
3–8 styles per season, 50–300 pcs per style on the first order. You need a boxy block that fits on a real body, a 450GSM hand-feel that survives a wash, washes that repeat across a size run, and sampling fast enough to meet a drop date.
What you get here: weight and wash references, a sample at 1–2 pieces, and a spec sheet you can compare batch to batch.
BEU wholesale, concept stores, small chains
30–100 pcs per style, mixed size runs, full documentation. You need EU size conversion, composition and care labelling, and a paper trail that clears customs without a second email chain.
What you get here: size conversion tables, material and technique cards, and a compliance list that states what we supply and what you must supply.
CCorporate, team and brand merch
100–1,000 pcs, date-driven, no in-house design team. You need blank heavyweight bodies, a decoration method that survives wear, and a date you can put in a calendar.
What you get here: the blank program from US$4.50, a print method comparison, and scheduling counted backwards from your event date.
If your order is 5 pieces, we are not the right supplier. If it is 50 and it has to be right the first time, keep reading.
Questions
Something not covered here? Send it with your file and it gets answered in the reply.
Samples start at 1–2 pieces. Bulk starts at 20–50 pieces per style across apparel, headwear and footwear, depending on fabric and wash. Accessories start at 50–100 sets, and headwear or footwear are quoted per order. Both numbers sit on the product card, not in a sales call.
Yes. That is the point of the 1–2 piece minimum. You approve hand-feel, fit and colour on a physical piece before bulk starts — and the sample is made within 24 hours of approved artwork and specification.
Weight is written in GSM on every product card, confirmed on the approved sample, and checked again when fabric arrives. A second batch is measured against the same number.
Acid, snow and vintage washes vary by nature. We approve a physical wash reference before bulk and hold it as the standard for the run. Batch retention is confirmed per order.
Yes. A tech pack, a graded size chart or a single reference sample are all valid starting points.
Three records, all dated: an Intertek on-site audit on 06 July 2026; an EU GPSR authorised representative appointed from 28 May 2026 to 27 May 2027; and German packaging registration DE4832998409726 from 01 June 2026. No textile certification is claimed in our own name, and no certification mark is used anywhere on this site.
Get a quote
Tell us the line and the quantity. You get fabric, weight, price and a sampling date — not a brochure.
— Reply on the next working day.
— Sample from 1–2 pieces, bulk from 20–50 across apparel, headwear and footwear.
— One named contact from spec to handover.
No account, no cart, no checkout — we quote, sample and produce.